| |
> Poseidon 3266 - Überwachung von bis zu. 4 Eingangskontakten und 3 Sensoren für Temperatur und Luftfeuchtigkeit über E-Mail, SNMP und SMS oder
GSM Modem- Rack Monitoring - Environmental Monitoring |
|
| |
|
| |
|
| |
Poseidon model 3266 is independent device which can send Email when a contact is switched on or when temperature or humidity gets out of set range. Except Email, Poseidon model 3266 can send SNMP Trap. Values and configuration are accessible from WWW graphic interface, sensor's values over several network protocols (SNMP, XML, Modbus/TCP and others).
Poseidon model 3266 can notice operator of crisis situation in various method (switched on/switched off contact, temperature or humidity out of set range).
When a Alarm occurs, the device sends you Email and notice Your NMS (Network Management Software) over SNMP.
Configuration and current values over graphic WWW interface.
* 4 Dry contact inputs for contacts connecting
* You can connect up to 3 temperature or humidity sensors.
* To connect sensors (over maximal distance of 10 meters) you can use standard phone adaptors, cables and connectors RJ11 or RJ12.
* Contact switch on -> sending email or SNMP Trap to several recipients.
Application
#
Security: supervising of sensors in IT rooms.
# SCADA systems: connecting of external inputs
# Monitoring of back-up power source: UPS and Diesel engines
# Monitoring of operating conditions: (temperature and humidity) ICT technologies (fire, security and phone systems)
# Logging of processes: storages, cold-storage rooms, freezers and fridges (food industry and pharmacy)
# IT – monitoring: server rooms, 19“ racks (ICT)
# Camera systems: external sensors connecting(door contact, PIR)
# Large buildings: heating and air-condition optimalization
# Systems interconnecting: fire (EPS), security (EZS), access system
# Air-condition monitoring: temperature and evaporated water leaking
# Supervising systems: Information points, ATM, terminals |
| |
|
| |
What the Poseidon 3262 measures
Sensors are connected over 1-Wire (RJ12), total wiring length must not exceed 10 meters. Each sensor monitors whether the value is in set range (including inputs for connecting contacts). It warns about set range exceeding (Alarm status) via Email or sending SNMP trap.
Compatible probes
* Temperature - Temp-1Wire
* Humidity - Humid-1Wire
* 4 inputs for Dry Contact
o Door contact
o Flood detector
o Gas leak detector
o Smoke detector
o Motion detector
Basic features
# It can be connected to every monitoring system of building, industry, IT and networks.
* Support and plug-in modules for many NMS application (LoriotPro, Nagios, SNMPc, HP OpenView, IBM Tivoli, MRTG and others).
* Works with most SCADA systems (OPC server and I/O server over Modbus/TCP)
# Graphic WWW interface for configuration and values monitoring.
* Configuration and current values over simple graphic interface (web browser) - screen shot
# Open communication protocols (WEB, Email, SNMP, XML, Modbus/TCP)
* Notification of Alarm status- Email, SNMP Trap, SMS (via SW).
# One a probe Poseidon 3266 unit monitors up to 7 external probes (4 contacts, 3 sensors over a bus), every sensor has unique ID.
* We supply temperature and humidity sensors in different design and cable lengths (1 / 3 / 10 meters).
# Security increased with password, IP address range, HW protection against configuration changes.
# No SW necessary.
* Set of supporting programs and utilities (PN Eye, Pos-Excel, PD Trigger and others)
* We supply programs for food industry (CapTemp), IT monitoring (nmsDashboard) and others
* SDK (Software Development Kit) development library available + examples (VB, Delphi, C, C#etc.)
# FirmWare update over WWW interface
|
| |
|
